Gripseal - Everwood 20L

Gripseal Everwood contains UV protectors which protects wood against the damaging effects of sun, rain, heat and cold as well as containing biocides which
retard bacterial and fungal growth. Gripseal Everwood has a low molecular weight which offers highly effective penetration into the wood substrates
which ensures maximum protection and preservation of wood. Due to its high penetration ability and the ideal combination of various natural oil, it not only feeds the wood but
ensures good filling of the wood pores and capillaries, as well as excellent transportation of the fungicides deep into wood. Gripseal Everwood is a non-toxic, low VOC and
environmentally friendly product that is fully compliant with international coating standards. Legislation concerning VOC reduction is currectly one of the main driving
forces for the architectural and building industry, and Gripseal Everwood is proud to be totally compiant with VOC limits as defined by European Directive 2004/42/CE.
Water-based oil, deep penetration, non-film forming, wood preservative, UV resistant, Weather-proof, Easy to apply, A variety of colours available, Environmentally friendly,
Easy maintenance re-coats, Minimul sanding required, Water clean-up and exterior use only.

Product applications:
Decks, Garage Doors, Window Frames, Jungle Gyms, Wooden Fences, Gates and Outdoor Furniture.

How to use:
1. It is imperative that the correct preparation of surface is done for your first application of Everwood. All previous treatments must have been removed and wood sanded down
to penetrable raw wood (Not too fine grit to be used).
2. Ensure wood surfaces are clean,dry and smooth. New wood: sand in the direction of the wood grain to a smooth finish.
Previously narnished/ oiled: Removed the old coat by sanding to raw wood or using a paint stripper and sanding to a raw wood. Wood previously treated with Everwood:
Wipe down with a cloth to remove dust and dirt. If necessary rub down with steel wool or 180 grit sandpaper for asmooth finish.
3. Use a paint brush, sponge, sponge roller or spray gun. For best results apply a 3 thin even coats. Allow 45 minutes between coats and 24 hours for the applied coats to cure
completely.
4. Clean the Gripseal applicators with clean water directly after application. Maintenance: Apply a maintenance coat approximately every 12 - 24 months or when wood appears
to be faded. (The degree of exposure will determine how frequently the maintenance coat is required). Coverage: 10 -12 square metres per litre per coat on soft wood. 8 - 10
square metres per litre per coat on hard wood. Availabel in 1l and 5l. Large quantities are available on request.